Manual point machines

At many places in the line network - e. g. trailed or faced points which are seldom set - the manual point machine is the most economic solution. Manual point machines are also suitable for installation in flat-bottom points. They can be installed beside or in the centre of the track. Spring-back or throwover function is possible on all point machines at all times without replacing components. Manual setting requires just one stroke of a setting lever – without arduous cranking or pumping. Manual point machines supplied by HANNING & KAHL convince users by their optimum cost/benefit ratio:

  • desired setting to spring-back or throwover function with same components possible on site
  • suitable for all point types, openings and gauges
  • manual setting possible with low force requirement with one stroke purely mechanically
  • edundant, progressively adjustable spring assembly for safe position of point tongues
  • end-position damping to reduce noise
  • protected with IP67 housing as HWU500