This hydraulic test bench consists of a stationary and a mobile part. The PC is located in the mobile element. The advantage for you is that you can carry out and record all measuring tests on the vehicle i.e. without dismounting the brake components. The device is equipped with an automatic program which runs through the entire brake system and displays the cause of the malfunction - this is very helpful if sporadic malfunctions occur. All malfunctions are recorded with details of the date and time they occurred in an archive.
After an accident, the hydraulic test bench can be used to verify that the brake is functioning correctly. When the testing program is completed, all the values measured can be recorded in a report and printed out.
|Operating voltage||400 Volt, 3 ̃|
|Fuse protection||16 A|
|Oil tank volume||40 l|
|Filtered oil, recommen-ded||not > NAS-Class 6|
|Accumulating volume||4 l|
|Accumulator initial||140 bar|
|Pump cut-in pressure||155 bar (variable)|
|Pump cut-out pressure||185 bar (variable)|
|Safety valve||190 bar (variable)|
|Triggering||via PC with VDT|
|Record of results||printer|
|Weight||Approx. 470 kg|